It is essential to always have a working windshield washer fluid. This does not just come down to driving comfort, but it is important to know that this also involves your driving safety because of the importance of seeing very clearly in front of you when you are riding your Suzuki Swift.
In this article, we want to explain step by step how to identify the fault and resolve it in order to find an effective windshield washer.
Different steps to repair a windshield washer that does not work on a Suzuki Swift
You have different important steps in order to repair the washer fluid of your Suzuki Swift that no longer works.
Identify the washer failure:
First thing to watch before handling, have you completed your cleaning fluid ? If so, let's see what are the causes that prevent your ice washer equipment from working properly.
Very often, your ice washer equipment becomes clogged with accumulated dirt or lime, this is the main reason that would prevent your hardware from working. To resolve this issue, try unclogging your sprinklers. These orifices are used to propel the washer fluid onto the windshield of your Suzuki Swift. It is very likely that they are clogged, by an accumulation of limestone, or various dirt. To do this, you can start by trying to blow, yourself or with something more powerful, such as a bicycle pump or even ideally the tire inflator at your gas station.
If that hasn't changed anything, try a thin and resistant object, like a paperclip for example, which will allow access to the interior without leaving a piece. We recommend that you also use a mixture of vinegar and hot water in order to clean the interior more effectively.
Test again, if the washer fluid still does not work, maybe it is clogged at a more inaccessible level, at the level of the connecting pipe. This makes the link between the pump and the nozzle.
To reach it, you will have to open the hood of your Suzuki Swift:
You should identify the two pipes specific to each nozzle. Try to clean them and of course make sure they are well connected. You can repeat the same cleaning processes that we told you about above. Once clean, make sure that water passes through it without blocking. Then reconnect them properly, and repeat the test. If we still have not solved the problem, you know suddenly that it is neither the jets nor the pipes on your Suzuki Swift.
Check the washer pump
From this point on, you should then check the pump. It is she who initiates the launch of the cleaning product.
It is located next to the cleaning fluid reservoir under the hood of your Suzuki Swift.
First test to do to see if it works, when you want to activate the washer fluid, you are supposed to hear a pump actuation noise. If there is no noise, this indicates that it is not working. It must therefore be changed.
For that, nothing very complicated. First, you will have to remove the two screws that allow it to be fixed to your Suzuki Swift.
Thereafter, you should spot two power wires. They are usually black and red. You will have to disconnect them, but be careful, you will have to reconnect them in the right direction once finished in which case you will create a short circuit. A little trick to remember: the red wire represents the + terminal. For example, put a piece of red tape in it to reconnect the correct color of cable. Or even logical with the black tape on the terminal -. Thanks to this, you can safely reconnect the wire of the right color later.
When you have done all of this, you can remove the old pump and thus place the new pump. Reconnect the cables to the corresponding terminals using the trick, then you just have to tighten the two support screws.
Repeat the test now.
Everything should be back to normal by now!
