The lighting that can illuminate your license plate does not work anymore. We should already quickly find the cause of this failure because the license plate of your Skoda Kodiaq must always be visible, even at night, hence the importance of this lighting.
First thing, you should know that this is not coming not necessarily a fuse that could have grilled. There are other causes for this dysfunction, which we will discover in a second part.
Easily find the license plate light fuse for your Skoda Kodiaq
Using the operating instructions for your vehicle, identify the fuse box, which gathers all vehicle fuses. Usually, three options are available to you on a Skoda Kodiaq.
- Look at the driver's side, left above your legs
- second option under the hood near the battery.
- Last option, under the glove box, by removing a plastic cover that protects the fuses.
Always thanks to this manual, identify the fuse controlling the plate light bulb which no longer lights up. You will find ahe list of fuses for your Skoda Kodiaq and all the compatibility details at the end of your vehicle manual.
How to identify the registration light fuse on your Skoda Kodiaq
Related to identify the fuse corresponding to the lighting of the license plate of your Skoda Kodiaq, it is useful to use the fuse diagram. The fuse diagram will help you find the position of each fuse, with its specific role. It therefore makes it possible to separate the multiple fuses of your Skoda Kodiaq, but also their different roles.
This is inside the service book of your Skoda Kodiaq. If you can't find it, look at internet the diagram dedicated to your Skoda Kodiaq.
The fuse allows to avoid overheating excessive wires in the event of a short circuit. It will therefore be the shield in case of overheating that will prevent a potential outbreak of fire. From the moment everything has been checked (wiring, bulbs, etc.) it is therefore necessary to look the status of the fuses of your Skoda Kodiaq.
When you have identified it, it must therefore be changed.
Replace the license plate light fuse on your Skoda Kodiaq
First turn off the ignition of your Skoda Kodiaq, then take the fuse out of its housing by gently pulling it upwards with your fingers, or with a small suitable pliers, without over-tightening. Be careful, the filament at the top of the fuse must not be cut.
If the fuse is dead (you will see this from black color or with cut filament), you must replace it with a fuse equivalent amperage. This characteristic is written on it: you will recognize a number followed by the letter "A".
Once the new fuse is installed on your Skoda Kodiaq, test the faulty bulb: if it turns on and stays on, you have found the solution for your Skoda Kodiaq! If however it does not light up, check the condition of the new fuse in place.
If he didn't move, then the failure came from somewhere else. If, however, this fuse has again wire rack, this indicates that there is a short circuit somewhere on your Skoda Kodiaq. In this case, we recommend that you go to a mechanic for a thorough examination.
In order to support you in your approach, we have also written an article dedicated to fuses and their handling on a Skoda Kodiaq, this will probably be able to help you:
- - Where is the fuse box located on a Skoda Kodiaq
My Skoda Kodiaq license plate light problem
If finding and replacing your license plate light fuse hasn't changed the problem, you should consider it your bulb that's burned out.
Is it really a fuse problem on the plate lighting of my Skoda Kodiaq
In this case, simply replacing it will solve the problem on your Skoda Kodiaq. Do the test by replacing the bulb and thus check the result. If nothing changes, several options are possible.
If it's not the bulb, let's see the other types of problem:
At first, it is possible that your BSI box is incorrectly calibrated, and so that it no longer sends the necessary power for ignition. This one aims to send electrical signals to the various functions of your Skoda Kodiaq so that they are carried out. You have the option of carrying out a few simple and quick tests in the garage to ensure that your Skoda Kodiaq is working properly.
Boitiser Bsi problem on my Skoda Kodiaq: no more license plate lighting
Otherwise, if your BSI box works perfectly, make sure that no cables are damaged. The same would result, the power would be cut off. You will need to remove the trunk trim of your Skoda Kodiaq to access the various cables.
If all these checks have been done and still nothing works, then you don't have many options left, it comes from the lighting fuse that has a problem.
Capital to know, the license plate light fuse on your Skoda Kodiaq just does not correspond to this function. In other words, if you only have a fault at that specific lighting, then your fault is not from that fuse, which is common.
If, however, your parking lights do not work or you notice other simultaneous breakdowns on your Skoda Kodiaq, then it is most likely related to the corresponding fuse.
